Aiwa HV-MX100U - Manual (Page 26)

Setting the color system Color system of each area
&
■ (3D CoiP CED '
(3D
1 Press MENU.
2 Press A/T to move the cursor ( f ) to COLOR
SYSTEM, then press ►.
■ .
1 PRO G RAM TIM ER
CLO CK SET
k I- c o l o r s y s t e m
H AUDIO SETUP
5 VCR SETUP
6 LANG UAG E
7 CHANNEL SET
SELECT : PT-A
ENTER
END : P®
Press to select the color system.
When COLOR setting is AUTO, the VCR automatically
selects the NTSC, PAL, SECAM, MESECAM, M-PAL or
N-PAL signal. Select AUTO for normal use.
If the VCR cannot select the correct color system,
resulting in abnormal color, set the COLOR manually.
- ii ?1 o l o r
'^ ^•AUTO • NTSC •PAL
•SECAM -M-PAL •N-PAL
SECAM M O DE
•SECAM ‘M ESECAM
SELECT: PT‘A
SET DATA: P^"^
END : P®
Area Color system
USA. Canada
Mexico, Latin America
(except Brazil and
Argentina), Japan, Korea,
Philippines
NTSC
Brazil M-PAL
Argentina N-PAL
Western Europe PAL
the United Kingdom,
Hongkong
PAL
China ' PAL
South East Asia PAL
The Middle and Near East PAL or SECAM
Eastern Europe SECAM
COLOR setting is retained even if the power to the unit is
interrupted.
Refer “To record in SECAM or MESECAM color system”
(page 12) for SECAM MODE operation.
4
Press OK to return to the normal screen.
2 5 ENGLISH