EXFO FTB-8500 Series for FTB-500 User Manual
Page 111
Advertising
Creating and Starting a Test Case
Ethernet and Fibre Channel Application
97
Ethernet BERT Test Case
4b. For Ethernet Unframed, select the
Enable Sync check box to allow any
receiver to bit-sync every second by
inserting an IFG of 12 bytes with
SOF. The Enable Sync check box is
not selected by default.
4c. Set the Auto-Negotiation, Speed,
Duplex, and Flow Control
parameters. Not available with
Ethernet 10G. Refer to Interface
Setup (Ethernet) on page 140 for
more information.
4d. Set the IP Version (IPv4 or IPv6). IP
Version is only available with
Framed Layer 2 when the IPv6 software option (SK-IPV6) is
enabled.
4e. Press Next.
Advertising
This manual is related to the following products: