EXFO FTB-8500 Series for FTB-500 - Manual (Page 189)

Traffic Analyzer Tabs
Ethernet and Fibre Channel Application 175
Traffic Filters
Traffic Filters
Allows gathering statistics according to the programmed filters. Up to 10
filters can be enabled and defined.
Note: The Filters tab is only available when the Advanced Traffic Filtering
software option (SK-ADV-FILTERS) is not enabled. Refer to Software
Options on page 378.
Press TEST, Traffic Analyzer, and Filters.
Filter Number (Filter No.)
Allows the selection of the filter number (1 to 10). A filter used (enabled)
for data capture will not be configurable and the message Filter in use for
data capture is displayed; refer to Filter on page 184.