Mpls, Stream no – EXFO FTB-8500 Series for FTB-500 User Manual
Page 235
Advertising
Stream Generation Tabs
Ethernet and Fibre Channel Application
221
MPLS
MPLS
Allows MPLS configuration of streams with up to two layers of MPLS labels,
COS/EXP and TTL parameters.
Note: MPLS has to be enabled during the test setup (refer to MPLS on page 104)
and the Network set to MPLS/IPv4, MPLS/IPv6, or MPLS/None (see
Stream Configuration on page 207) to gives access to the MPLS
configuration for the selected stream.
Press TEST, Stream Gen, and MPLS.
Stream No.
Select the stream number from the list.
Advertising
This manual is related to the following products: