EXFO FTB-8500 Series for FTB-500 - Manual (Page 415)

Tools Tabs
Ethernet and Fibre Channel Application 401
Trace Route Results

Status: Indicates the status of the attempt.
Status Description
Successful Valid ICMPv4/ICMPv6 echo reply received.
User Aborted When a user has manually stopped the Ping function before the end of
attempts.
Time Out When an ICMPv4/ICMPv6 echo reply was not received within the
defined timeout.
Destination
Specified is
invalid With reserved IP addresses:
For IPv4: 0.0.0.0, 127.0.0.0, and all addresses above 240.0.0.0 (Class E
and above).
For IPv6: 0::/8 (reserved/unspecified), 0::1/128 (Loopback), FF00::/8
(Multicast).
Hop Reached When a Time Exceeded message is received from a host while
executing the Trace Route function.
Destination
Unreachable For IPv4: When the IP address is unreachable (no default gateway for
an IP address, not in the same subnet, or an ICMP Unreachable
message is received.
For IPv6: When the IP address is unreachable (no default gateway for
an IP address, not in the same subnet, or address resolution failed) or
an ICMP Destination Unreachable message is received.
Data
Corrupted For IPv4 only, when the string of the received Ping reply is not valid.
Packet Too
Big For IPv6 only: The packet cannot be forwarded since it size is larger
than the MTU of the outgoing link.
Undefined For any other errors in Ping that do not fall into one of the above
description.