EXFO FTB-8500 Series for FTB-500 - Manual (Page 91)

Creating and Starting a Test Case
Ethernet and Fibre Channel Application 77
EtherSAM (Y.1564) Test Case
6. Services must be enabled before starting the test. For enabling Services
and for additional configuration parameters, refer to EtherSAM Tabs on
page 323.
7. Press the Start button to start the test.
At least one of the EtherSAM (Y.1564) sub tests (Service Configuration
Test or Service Performance Test) has to be enabled to start the test.
The sub-tests that are enabled will be performed following this order:
Service Configuration Test and Service Performance Test.
8. For additional results, refer to EtherSAM Tabs on page 323.