EXFO FTB-8500 Series for FTB-500 - Manual (Page 448)

Expert Mode Tabs
434 FTB-8500 Series and FTB-8120NGE/8130NGE
Expert Mode (BERT)
Expert Mode (BERT)
Expert Mode allows the configuration of the thresholds for which each
statistic will be compared to declare a PASS or FAIL verdict.
Press TEST and Expert Mode.
General Properties
Expert Mode: Allows enabling/disabling the Expert Mode. This setting is
disabled by default.
Expert Mode Status
Verdict: Gives the verdict, Pass or Fail, of the Port, Ethernet and Pattern
tests according to the Expert Mode settings.
Note: The verdict results are only available when the Expert Mode has been
enabled and when the test is completed or stopped.
Verdict Description
Pass If all result values meet the configured criteria.
Fail If any result value does not meet the configured criteria.
“--” Is displayed when at least one of the following conditions is met: the Expert
Mode is not enabled, there is no defined criterion, or when the specific test has
not run yet.