Frame parameter – EXFO FTB-8500 Series for FTB-500 User Manual
Page 243
Advertising
Stream Generation Tabs
Ethernet and Fibre Channel Application
229
Frame Configuration (Fibre Channel)
Frame Parameter
Size: Allows the selection of the frame size. The default setting is 2148
bytes. The frame size is configurable by 4 byte steps. Choices are:
Rate: Allows the selection of the frame rate. Choices are from 0.1 to
100% when the selected rate unit is percentage. The default setting is
100%.
Unit: Allows the selection of the transmission rate unit. Choices are %,
MBps, and Mbps. The default setting is %.
Framing
Frame Size (bytes)
From
To
Latency Tag
not enabled
Latency Tag
enabled
Framed Layer 1
12
36
2148
Framed Layer 2
40
64
2148
Advertising
This manual is related to the following products: