EXFO FTB-8500 Series for FTB-500 User Manual
Page 443
Advertising
Expert Mode Tabs
Ethernet and Fibre Channel Application
429
Back-to-Back (RFC 2544)
Unit: Select the unit. Choices are: bps, Kbps, Mbps, Bps, KBps, MBps,
Gbps, GBps, % Util, fps (Frame Per Second), Frames/Burst, and
Bytes/Burst. The default setting is Frames/Burst.
Layer: Select the Layer. Choices are Layer 1,2,3, Layer 2,3, and
Layer 3. The default setting is Layer 1,2,3.
Layer 1,2,3 contains the Preamble, Start of Frame Delimiter, MAC
address, IP address, and data.
Layer 2,3 contains the MAC address, IP address, and data.
Layer 3 contains the IP address, and data.
Displayed Results: Select the displayed results mode. Choices are
Current, Minimum, Maximum, and Average. The default setting is
Current.
Advertising
This manual is related to the following products: