BINDER UF V 500 - Manual (Page 53)

UF V (E2+E2.1) 03/2013 page 53/112
8.3 Operating mode USER: Advanced settings
• In Normal display, press “EXIT” and “MODE” simultaneously for 3 seconds to access the options for
selecting the operating modes of the freezer.
Figure 33: Selecting the operating mode
• Press “▲” or “▼” until the value “OP.U” (operating mode USER) appears in the display.
• Press “MODE”. The display to enter the password appears.
The operating mode USER is password-protected by a number. The password is preset to "1" in factory.
You can change the password in operating function “ PA.U”.
Figure 34: Password request
• Use “▲” or “▼” to enter the password and press “MODE”.
• Use the “MODE” key to successively call up the operating functions. Use the “EXIT” key to go back to
the previous operating function.
• Use “▲” or “▼”to set the values of the operating functions.
This menu also offers activating and inactivating the CO
2
emergency cooling (option, chap. 11):