BINDER UF V 500 - Manual (Page 55)

UF V (E2+E2.1) 03/2013 page 55/112
Display Setting range Operating function
0 to 999
Password setting for access to operating mode USER
Remember the modified password or you will no longer be able to access
operating mode USER.
1 to 254
Setting the unit address.
Addressing serves for data transfer e.g. via the communication software
APT-COM™ 3 DataControlSystem. Do not change standard setting “1”.
Firmware revision of main controller for service / maintenance pur-
poses.
Firmware revision of safety controller for service / maintenance pur-
poses.
Data record (year) for service / maintenance purposes.
Data record (month) for service / maintenance purposes.
Data record (day) for service / maintenance purposes.
Data set version for service / maintenance purposes.
0 to 999
Counter of operating weeks
0 to 168 Counter of operating hours, up to one week