Casella CEL CEL-393 - Manual (Page 28)

memory locations are indexed, the display will indicate 00.0. Subsequent
operation of a number key and M returns to the first L
eq result again.
Memory capacity is approximately 720 periods (reduced to approx. 499
in B version).
Environmental Mode
Answers are selected in this mode by using the same key codes as for
the F key. Therefore 1M brings the first L
eq result from the memory to
the display, with subsequent operation of the M key stepping through the
L
eq results in time order until all the L eq results have been displayed.
Subsequent operation of the sequence 1M returns to the first L eq result.
Similarly, the sequence 4M selects the L 10 result for the first period,
which may then be stepped through by subsequent operation of the M
key.
Memory capacity is approximately 90 periods (reduced to approx. 60 in
B version).
Event Mode
Operation of any numerical key followed by M will bring the time in hours
and minutes of the oldest event in the memory to the display. Subsequent
operations of the M key display the SEL (L
AX ) of the event, then its
maximum value, and finally its duration in seconds.
Continued operation of the M key displays the time of the second oldest
event, followed by its SEL, maximum, and duration, and so on. Re-op-
eration of a numeral and M returns to the oldest event again.
Memory capacity is approximately 180 events (reduced to approx. 119
in B version).
Analysis Mode
/24. 393 Handbook