CONTA-CLIP CONTA-Sign 5.2 - Manual (Page 13)

Page 13 of 67
8.2 Select the labeling element
Click on the relevant manufacturer to select the labeling element required.
If you have switched on element recognition for the plotter or engraver, the individual
segments will be displayed on screen.
Double-click on the segment required. This
displays only the manufacturers of labeling
elements that can be used with the support
plates fitted.
Double-click to select the manufacturer and
then the element to be printed.
The relevant template appears on screen.
If you are not using the element recognition,
or using the VE 600, the labeling element will be shown on the screen by selecting
with a click.
There are different sizes, shapes and
material thicknesses available, in this
case tags with the size 10 x 15 mm
were selected.
If the labeling element, label sheet or endless labels are not available in the database,
you can use the designer variant to set these up at any time.