CONTA-CLIP CONTA-Sign 5.2 - Manual (Page 65)

Page 65 of 67
13.6 Assigning the support plate to the marking element
The database for the labeling software contains a large number of marking elements
from different manufacturers. Each marking element is assigned to particular support
plates.
The menu item > Help > Support plates shows which marking elements can be used
with which support plates. There is a wide range of search functions available for
doing this. For example, you can search for a particular marking element and find the
relevant support plate, etc.
14. General information and adjustments
14.1 Zoom function
You can activate and deactivate the zoom function by following the menu path
> View > Zoom function or by clicking on the relevant icon. Click once on the icon and
then take the mouse to the point on the base plate whose view you wish to change.
Left-click with the mouse to select this point as the new central point of the screen
and enlarge the display. Clicking the icon again deactivates the function, thus
enabling you to continue working with the zoom factor that you have now set.
Right-click with the mouse to reduce the size of the screen content.
14.2 Select program language
You can change the program language by following the menu path
> Options > Language settings.
14.3 Display and switching within open project files
You can always obtain an overview of the number of projects and base plates open
from the > Window menu or looking at the explorer view to the left. You can work on as
many as 10 projects, with each project having up to 256 base plates (plotter and
engraver). You can use this menu to switch from one project to another.