CONTA-CLIP CONTA-Sign 5.2 - Manual (Page 30)

Page 30 of 67
The button Stop will interrupt the engraving immediately and the engraving head
returns to the home position.
With the button Repeat the current engraving part can be restarted.
With the engraving part completed the button Continue takes you to the next step of
the engraving sequence, like graphical ele-
ments or contours if set up.
If no further steps are set the button
Continue is closing the engraving
window.
9.3 Printing on an office printer
The first time you send your data to be printed on an office printer, the following
message appears on screen:
When you confirm the message by clicking on OK, a window opens with the Printer
tab showing all printers available.