CONTA-CLIP CONTA-Sign 5.2 - Manual (Page 31)

Page 31 of 67
Now choose the printer you require and click on the button Test page.
A < Portrait test page > sheet is then printed on the relevant printer. Measure the top
and left margin with a ruler and enter the values in the respective boxes.
These entries are needed because all printers have different margin settings for text.
Click on OK to save these values. The program will then take you to the
< Print options > window, where you can set the following parameters for the printout:
- Specify the number of label sheets to be printed.
- Specify whether only the selected text or labels (tags) should be printed.
- Specify whether a frame should be printed around the lettering.
This function is useful if you want to cut out printed labels with scissors.
If you check this box, the program automatically takes you to the frame selection.
By clicking the relevant box, you can choose whether to plot a frame around labels
with lettering only or to plot a frame around all labels on the sheet.
If you select Plot frame only, only the frames will be printed, without any lettering.