CONTA-CLIP CONTA-Sign 5.2 - Manual (Page 42)

Page 42 of 67
11.1.2 Design a marking element with more than one tag group
To set up groups of tags of different sizes, you proceed exactly as described in the
previous section.
In order to assign the tag groups, on the left of the window you must specify
appropriate names for the different tag groups. Once you have specified the name for
a tag group, you can then
enter the tag parameters
and measure the tags and
then create a layout if
required.
When you have finished
one tag group, you can set
up more tag groups.
11.1.3 Design marking strips
You have already specified the name for the marking strip, X-strip.