CONTA-CLIP CONTA-Sign 5.2 - Manual (Page 63)

Page 63 of 67
13.3 Base plates and segments
The plotter has one base plate that can be fitted with various support plates. For this
reason, the base plate is divided into sections known as segments. An A3 plotter has
four segments and an A4 plotter has two segments. You can create several base
plates in one project. Follow the menu path > Edit > Base plate > Add to add a new
base plate. The bottom line of the screen shows the base plates created. It is also
possible to copy base plates and segments.
The project explorer at the left side of the screen shows the current projects open and
base plates as well as segments used.
13.4 Control print of the labeling data
If required, you can print the labels you have created on a base plate on a standard
office printer, for checking purposes.
You can run the print by following the menu path > Extras > Print on paper printer.
Segment 1 Segment 2 Segment 3 Segment 4
Base plate 1