CONTA-CLIP CONTA-Sign 5.2 - Manual (Page 5)

Page 5 of 67
- Office printer
To print any type of label sheet (DIN A3/A4).
- Thermo transfer printer
To print endless labels and endless strips
4. General program functions
Basic software structure
Various labeling devices such as plotters, engravers, office and thermo transfer
printers can be controlled using the labeling software. All labeling elements stored in
the database are assigned to the relevant labeling devices. When the labeling device
has been selected, the only labeling elements provided will be those that the particular
device can print or engrave.
If, for example, the office printer is selected as the output device, the label sheets set
up in the database are automatically provided for selection.
The corresponding designer enables new templates for various output devices to be
set up quickly and easily.
General procedure for using the labeling software
1. Choosing the labeling or engraving device
2. Select the labeling / engraving element
3. Labeling elements
4. Output of labeling data on the output device