CONTA-CLIP CONTA-Sign 5.2 - Manual (Page 45)

Page 45 of 67
11.2 Setting up engraving tags for engraving units
Call up the Designer under > Extras > Designer/Layouter for > Tags (Engraver).
The following window opens up:
Here you can create a new
engraving element (individual
tags or tag groups) by clicking
on the New button.
First enter the name of the
engraving element you wish
to create in the left-hand
window.
Then you can define whether
you want to use the plotter`s
support plate recognition
function.
Use the plotter`s support plate recognition function.
If you have a plotter unit with support plate recognition, it is advisable to use this
function to make it easier later on to find the engraving element that you have created.
To do this, the plotter must be switched on and the relevant support plate positioned
on the plotter.
If you do not want to use support plate recognition, or are using a plotter with no
support plate recognition function, click on < Specify type of support plate >.
Pre-select is the DIN A4 support plate, select another type on which you want to set up
the element if required.
If none of the suggested support plates are required, click on
< Use complete labeling area >, also needed with the use of custom made support
plates.
Then you define the engraving material and enter the thickness of the material in the
box at the bottom of the window.