Omnia Audio Omnia A/XE - Manual (Page 20)

14 | Getting Started
audio sources you can use in the application.
NOTE: When you enter a license code, A/XE will contact a secure Telos server to activate the code on your
PC. If the PC is not usually connected to the Internet, you may want to connect it temporarily while you
are entering the license code(s). This will allow the activation process to take place automatically. If
this is not possible, then you have the option to activate the license from another PC. Please read the
Manual Activation section in the License Manager chapter for the full details.
1. Click the Licenses link at the top of the Control Panel page. The License Manager
page will be displayed:
2. Click the Add… button. Enter your license code in the License field then click the Save
button.
3. The code you entered will show up in the Licenses list on the left. Next to the license
code you will see additional text describing the state of the license. The text will initially
say “Pending activation” then after 10-15 seconds it should change to “OK”. Repeat step
2 for each license code you have received. If all license codes have an “OK” status then
skip step 4 below and jump to the Create Audio Sources section.
4. If you see an error message next to the license code, please check the license string to
make sure it matches the one you received. If the error is “Activation failed” or similar