Omnia Audio Omnia A/XE - Manual (Page 9)

2
Software Installation
This chapter describes the steps involved in installing Omnia A/XE on your PC. The
Omnia A/XE installer includes a Virtual Audio Cable driver and a copy of the Axia
IP-Audio driver. The sections below describe when to install the included drivers.
System Requirements
♦
Windows XP or later.
♦
Minimum 512MB RAM.
♦
20MB free hard-drive space
♦
Network Interface Card
The Omnia A/XE application runs on 32-bit or 64-bit versions of Windows XP or later.
The Virtual Audio Cable driver and the IP-Audio driver will only work on 32-bit versions
of Windows. If you need to use one or both drivers then you will need to install Omnia
A/XE on a 32-bit version of Windows.
Starting the Installer
If you received Omnia A/XE on CD-ROM...
If you received the software on CD-ROM, please insert the disk in one of the PC’s
CD-ROM drives. If autorun is enabled for the drive then the following window will be
displayed: