Proel PRONET v.2.1 - Manual (Page 35)

35
ratio for signals above the threshold For example, a 5:1 ratio means that a signal exceeding the threshold by
5 dB will be compressed to 1 dB above the threshold. This parameter is not available in “Limiter Mode”.
6.2.3 Output Delay
Fig.49 Output delay parameters.
Value
Delay value.
Unit
Unit of measurement for the delay. Note that selecting unit of measurement for length (mm, m, inches,
feet,...) the amount of delay (distance value) depends on the air temperature as indicated in the
“environmental settings” (see “Setup page”).
6.3 GEQ page
Fig.50 Edit page for graphic equalizers.
In GEQ pages you can control the 28-bands 1/3 octave graphic equalizer (GEQ) processing block of each input
channel, using the band sliders just like you would do on a normal graphic EQ.