Proel PRONET v.2.1 - Manual (Page 64)

64
Above/Below
Selects if the dynamic equalizer works above the threshold condition or below the threshold condition.
Side/Norm
Selects if the detection block “analyze” the whole signal (normal mode) or a filtered signal (side chain mode).
The filter applied for the side chain depends from the type of filter selected for the signal:
Signal filter type
Side chain filter
Low Shelving at freq. f
0
Low pass, cut freq. f
0
Peaking centered at f
0
pass band centered at f
0
High Shelving High pass, cut freq. f
0
Fig.82Side chain filters.
On
Enable or disable the single dynamic eq. cell.
7.4 Global page
In Global page you can visualize and check the frequency response plots of the equalization.
Fig.83 Global equalization plot.