Rena T-750 - Manual (Page 10)

GETTING ACQUAINTED
EasyFeed Lite (Optional Feeder) Connections/Controls
1 Tabber/Feeder Control Cable – This connection permits the tabber to control the
feeder when the mode switch is in the Automatic Position.
2 Power Inlet Connection – The power cord is plugged in here.
3 Fuse – The feeder fuse is located here.
4 Main Power Switch – This switch will turn the feeder On and Off.
5 Mode Switch – The mode switch permits selection of either the Automatic Mode (the
tabber controls the Feeder) or Manual Mode (the feeder speed is controlled manually by
the Feeder Speed Control).
6 Feeder Speed Control – When the feeder mode switch is in the manual position, this
knob controls the speed of the feeder.
7 Media Thickness Adjustment – Used to adjust the height/pressure of the forwarding
rollers (exit rollers), to accommodate the media thickness.
T-750 Tabber Operations Rev. 3/4/08 10