Ptional, Eeder, Onnections – Rena T-750 User Manual

Page 11: Ontrols

Advertising
background image

GETTING ACQUAINTED

EasyFeed 120 (Optional Feeder) Connections/Controls

2

3

6

4

1

5




















1

AC Power Receptacle – Connect the AC power cord here.

Important! Please verify that voltage is correct, for your feeder, before connecting.

2

Interlock Connector – Feeder Interface Cable from tabber connects here.

3

Stand Alone Switch – Allows machine to run when not signaled by host machine.

4

Speed Control Knob – Used to set the speed of the feeder.

Important! The feeder’s transport speed must be set slower than the tabber’s transport

speed, in order to generate at least a 2” gap between pieces.

5

Power Switch – Used to power the feeder on/off.

6

Jog Button. – Runs feeder at preset speed for setup (over-rides interlock controls)




Interlock Control Switch
This switch, located on bottom of feeder, must be set to N.C.
N.C.: Closed Input = Run
N.O.: Closed Input = Stop

NOTE: The power must be cycled (off and on) to
recognize a change in this switch position.


11

Advertising