Research Concepts RC2500 - Manual (Page 178)

RC2500 Antenna Controller Appendix T Version 1.15 Support on Special Features 171
Research Concepts, Inc. • 5420 Martindale Road • Shawnee, Kansas • 66218-9680 • USA www.researchconcepts.com
Sticky key jog operations occur from MANUAL mode. Sticky key jogs are disabled at program startup
and whenever the controller exits MANUAL mode. To enable sticky key jog operation the controller must
be configured for Expert Access. If Expert Access is enabled, to enable sticky key jog operation enter
50562 at the CONFIG mode Expert Access prompt. Control will switch to MANUAL mode and sticky key
operation is enabled. When a sticky key jog is in progress the controller still senses limits and detects
jammed errors. When the user exits MANUAL mode the sticky key jog feature will be disabled.
Manual Revision Notes (related to this software update).
I corrected a problem with the expert access description. The first line of the original text said that it
limited access to certain CONFIG items. I added certain operating modes to the first sentence. In the
third sentence I added the modes that the user is locked out of (delete and setup).
AGC scroll up/down disclaimers, sections 4.4.1 and 5.1, maybe leave them in for awhile and mention that
the feature is implemented with version 1.15 of the software.
Chapter 3 – install section – mention dual speed resolvers and sticky key, maybe also a special section
for andrew upgraders –> dual speed resolvers and andrew p/n’s
In chapter 5 config, bring in the documentation and show the screens for the soft limits along with the soft
limit documentation. In chapter 3, after dual speed resolver/direction setup, discuss setting/resetting soft
limits and refer customers to chapter 5 – config – soft limit stuff.