Research Concepts RC2500 - Manual (Page 5)

5.6 RESET Mode 48
5.7 DELETE Mode 48
5.8 CONFIG Mode 49
5.8.1 Reverse Sensor Direction 49
5.8.2 Simultaneous Azimuth and Elevation Movement 50
5.8.3 Remote Communication Parameters 50
5.8.4 Position Display Offsets 51
5.8.5 Polarization Equipment Code 51
5.8.6 Azimuth, Elevation, and Polarization Drive Options 51
5.8.7 Time and Date Settings 53
5.8.8 Signal Strength Parameters 54
5.8.9 Antenna Parameters 54
5.8.10 Track Mode Parameters 55
5.8.10.1 MAX TRACK ERROR 55
5.8.10.2 SEARCH ENABLE 56
5.8.10.3 SEARCH WIDTH 56
5.8.11 Expert Access Flag 57
5.8.12 Reset System Data 57
CHAPTER 6 – SPECIFICATIONS 58
CHAPTER 7 – TROUBLESHOOTING/ALARM CODES 59
7.1 SYSTEM ERROR CODES 59
LOW BATTERY 59
ESTOP 59
MAINTENANCE 59
SUMMARY LIMIT 59
UP, DOWN, CW, CCW limits 60
ANT AZIM, ANT ELEV, ANT POL 60
AZIM SLOW SPEED, ELEV SLOW SPEED 60
COMM PORT 60
POL OPTIONS 60
AZ/EL OPTIONS 60
TIME/DATE 60
ANT/RCVR CONFIG 60
TRACK CONFIG 61
7.2 TRACK MODE ERRORS 61
JAMMED 61
LIMIT 61
RUNAWAY 61
DRIVE 61
PEAK LIMIT 61
SYSTEM 61
CHECKSUM 61
7.3 OPERATIONAL TROUBLESHOOTING TIPS 61
ANTENNA MUST BE PEAKED MANUALLY AFTER AN AUTO-MOVE 61
ANT AZIM, ANT ELEV or ANT POL ERRORS OCCUR 62
ENTRY SELECTED HOLDS INVALID DATA 62
GAPS IN THE TRACK TABLE 62
APPENDIX A – EXPERT ACCESS / RESET SYSTEM DATA CODE 64
APPENDIX B – FIELD UPGRADING 65
Updating RC2500 Antenna Controllers that are In-Service. 65
To Perform a Complete RC2500 System Reset 66
To Convert the RC2500 from 115VAC to 230VAC Operation: 66
RC2500 Non-Volatile Memory Items Worksheet 1 67
CONFIG MODE ITEMS 67
Satellite positions stored in memory 67
RC2500 Non-Volatile Memory Items Worksheet 2 68
CONFIG MODE ITEMS 68
Satellite positions stored in memory 68
APPENDIX C – RS-422 SERIAL INTERFACE 69
RS-232 to RS-422 Protocol Converter 69
Software 69
APPENDIX D – THE RCI RS422 INTERFACE SPECIFICATION 71
Introduction 71
Electrical Specifications 71
Physical Specifications 71
Data Format 73
Message Protocol 73