H3C Technologies H3C SR6600-X - Manual (Page 22)

12
Figure 9 Installing the ring terminal
Connecting the grounding cable
1. Remove the grounding screw from the rear panel of the router chassis.
2. Attach the grounding screw to the ring terminal of the grounding cable.
3. Use a screwdriver to fasten the grounding screw into the grounding screw hole.
4. Attach the ring terminal on the other end of the grounding cable to the grounding strip.
Table 6 Connecting the grounding cable
Insulation sheath Ring terminal
1 2
3 4
Grounding cable
5mm