H3C Technologies H3C SR6600-X - Manual (Page 54)

44
Replacing a CF card
CAUTION:
•
To avoid hardware damage, do not remove the CF card when the router is booting or the CF LED is
flashing.
• Before you replace a CF card, open the CF card cover first. For more information, see “ Installing a CF
card .”
1. Press the ejector button next to the CF card. The ejector button moves outward so that it projects
from the panel.
Figure 56 Press the ejector button
2. Press the ejector button again. This ejects the CF card partially out of its slot. Pull the CF card out
of its slot.
Figure 57 Pull the CF card
3. To install a new MIM, see “ Installing a CF card .”
NOTE:
To protect the CF card, place it into an antistatic bag.