Linkskey LKV-9208IP - Manual (Page 102)

Prima IP User Guide Rev. 1.6
4.27 Apply Settings/Restart Servers –
Validate New Settings & Restart
Video Servers
All the new settings you have made could only be committed to the PRIMA IP’s
database by clicking the Store Settings / Store / Store User button on each setting
page. However, just clicking any of these buttons won’t have these new settings
immediately validated. You should hit the Restart Servers button so that new settings
can be put into use at once.
Note: The Restart Servers button will disconnect all current viewer connections.
Note: In addition to the Restart Servers button, the PRIMA IP also provides an Reboot button (on
Maintenance / Reboot page). This Reboot button is used only when the Restart Servers button
could works no longer to bring the PRIMA IP to normal restart for a proper viewer connection. If
you find the Restart Servers button no longer works to bring the PRIMA IP to an effective restart,
you can click the Reboot button on the Maintenance / Reboot Page. Only bear in mind that the
reboot brought about by hitting the Reboot button is a total reboot and takes longer time to boot up
completely, while Restart Servers is much quicker (just few seconds) since it restarts only the
server programs on the PRIMA IP.
- 98 -