Linkskey LKV-9208IP - Manual (Page 94)

Prima IP User Guide Rev. 1.6
4.20 Alarms/SNMP – Sending SNMP Messages
For Critical Server Events
Here you can set up the SNMP traps sent by the PRIMA IP, provided you selected the
SNMP traps somewhere into the Alarm page.
After you have made all modifications, click Store Settings to save your settings and
then hit Apply Settings / Restart Servers to validate these new settings. Every change
you have made on this page will NOT apply until you hit Apply Settings / Restart
Servers!
Settings
Primary Manager: Specify here the IP address of the Primary SNMP manager device
on your network.
Secondary Manager: Specify here the IP address of the Secondary SNMP manager
device on your network (if any).
SNMP Community: Specify here the name of the SNMP Community to which your
SNMP Management host and SNMP agent should belong.
Note: The SNMP manager and agents must belong to an SNMP community identified by its name,
which is a collection of hosts grouped together for administrative purposes.
- 90 -