Linkskey LKV-9208IP - Manual (Page 95)

Prima IP User Guide Rev. 1.6
4.21 Alarms/Selections – Select The Alarm
Triggering Events
The PRIMA IP is capable of sending immediate alerts, either as emails, SNMP traps, or
performing automatically a power cycling when there is blue screen, no video, or
NumLock test failure from a remote computer. This feature should be used in
conjunction with the autoscanning function, so that the PRIMA IP will help carry on a
constant surveillance on the health conditions of your connected servers.
Note: This Alarm Selection page is where you can select which action PRIMA IP must do when it
detects an event. This page is NOT the place where you can specify how the action is to be
implemented. To do so, refer to SNMP Traps, Email Alarms and Computers.
After you have made all modifications, click Store Settings to save your settings and
then hit Apply Settings / Restart Servers to validate these new settings. Every change
you have made on this page will NOT apply until you hit Apply Settings / Restart
Servers!
There are three types of alarm-triggering events the PRIMA IP can respond to:
•
No Video
•
Blue Screen
•
NumLock test failure
Each one of these events can be configured to trigger any one of these three types of actions:
•
Send an email
•
Send an SNMP trap message
•
Restart the computer (Power cycling)
- 91 -