Linkskey LKV-9208IP - Manual (Page 64)

Prima IP User Guide Rev. 1.6
Note: PRIMA IP can support only one User Name / Password and one PPP connection at a time.
Modem Initialization (chat script): The modem initialization script is a chat script
that will initialize the modem to be ready for connection. The standard script provided
by default permits to connect a Windows client to PRIMA IP in server mode over a
direct serial cable (Null Modem).
TIMEOUT 3600
CLIENT CLIENTSERVER
In other words: wait for "CLIENT" one hour before timeout, and respond
CLIENTSERVER without carriage return.
Note: Refer to Power Management page for more details about the chat program. Refer also to
your modem documentation. We also strongly recommend you refer to the standard man pages of
pppd and chat programs on Linux. In server mode, the modem should be set to await and
automatically connect when receiving remote calls.
PPP Client Settings
Current Local IP Address : This is where you can check up the dynamic IP address
that has been assigned to the PRIMA IP by the PPP server at connection time, for
example: 62.147.111.39. However, if the PPP connection is not yet established, the
IP address will be shown as Unknown.
Note: This IP address is used by the PRIMA IP either as a PPP client, and thus is distinct from the
one that is used by the PRIMA IP on the LAN.
Maximum Speed: Specify the modem connection speed. The PRIMA IP supports a
high-speed serial connection up to 1 Mbps (Megabits per second).
Note: T he modem connection speed is NOT the PPP connection speed, which depends on the
modem technology. For example, even if the modem connection speed is 115 200 bps, a 56K
modem will provide only a 56 000 bps PPP connection.
- 60 -