Linkskey LKV-9208IP - Manual (Page 79)

Prima IP User Guide Rev. 1.6
4.12 KVM Server/Local Console – Configure
Local Console Authentication And
Mouse Acceleration
The Local Console page allows you to enable or disable the user password
authentication feature on the Prima IP Local Console, and to adjust the mouse
acceleration on the local console.
After you have made all modifications, click Store Settings to save your settings and
then hit Apply Settings / Restart Servers to validate these new settings. Every change
you have made on this page will NOT apply until you hit Apply Settings / Restart
Servers
!
Local User Needs Authentication
Here you can enable/disable the password authentication on the Local Console. To
enable the password authentication on the Prima IP local console, you have to check
this option. And to disable it, just uncheck. When you have done with the modification,
always remember to hit the Apply Setting / Restart Servers button.
Acceleration Rate
This option will allows you to select the mouse acceleration factor for the local console.
Mouse acceleration factor range is from 1 x to 20 x for your selection.
Acceleration threshold
This option will allow you to select the mouse acceleration threshold in pixels. The
mouse acceleration threshold is a value (in pixels), only when the cursor moves
beyond which, will the local console mouse acceleration factor be effected.
Note: In order for the mouse resynchronization to work fine on the viewer, the mouse acceleration
on each of the connected servers or computers has to be turned off. A zero acceleration mouse on
a remote server will not reflect on the viewer since the mouse cursor on the remote server should
- 75 -