Rose Electronics QuadraVista II - Manual (Page 25)

QUADRAVISTA 2 INSTALLATION AND OPERATIONS MANUAL 19
OSD Security Levels
Use arrow keys to navigate in the SYSTEM menu to the entry SECURITY and press ENTER/SELECT to open the
SECURITY window.
The SECURITY feature allows you to reduce the functional range of QuadraVista 2. Eight security levels are
available for this purpose.
By default, all functions are enabled (security level 0). To change the security level, you must first enter a predefined
password. This six-digit password is enclosed separately with the deliverables of QuadraVista 2 and should only be
accessible to authorized persons (administrators etc.).
After entering the password on the keyboard or front
panel (password is not displayed in password field), the
SECURITY window opens.
Enter the desired security level (0 to 8) under “Select
security level”.
Note: Before changing the security level, please set the configuration you wish to work with to the higher security
level, under MODE
 START. This configuration will be maintained QuadraVista 2 is reset, in case of power
failure, or when power is turned off and on again.