Rose Electronics QuadraVista II - Manual (Page 32)

26 QUADRAVISTA 2 INSTALLATION AND OPERATIONS MANUAL
SECURITY LEVELS
The security level settings in the OSD menu also apply to control via DCP messages. Queries are possible up to
security level 7.
The table below shows the maximum security levels for simple element settings. These settings may be changed via
DCP up to the specified protection level.
Maximum security level for:
CONSOLE CHANNEL 6
VIDEO CHANNEL 6
VIDEO LAYOUT 5
PIP LAYOUT 4
PIP SIZE 4
PIP OFFSET 4
PIP ZOOM 4
PIP CHANNEL 4
DUAL CHANNELS (L/R) 6
PIP SCAN TIME 4
PiP (Picture in Picture Function)
Use arrow keys to navigate in the MODE menu to the entry PIP and press ENTER/SELECT to open the PIP window.
In the PIP window you can configure PiP size, position, and display mode.
PiP size
Adjust the size of PiP images to your requirements. 12 (single mode) or 9 (triple mode) different sizes are available:
Single: 3 % - 5 % - 7 % - 10 % - 15 % - 20 % - 25 % - 28 % - 33 % - 38 % - 44 % - 50 %
Triple: 3 % - 5 % - 7 % - 10 % - 15 % - 20 % - 25 % - 28 % - 33 %
50 % equals the size of one quad screen (one quarter of a full size screen).