Safety – Rose Electronics QuadraVista II User Manual
Page 71
SAFETY
QUADRAVISTA 2 INSTALLATION AND OPERATIONS MANUAL
65
Safety Guidelines
Please read this manual carefully before putting the device into operation.
Observe all warnings and instructions on the device and in the operation manual. Keep this user manual for future
reference.
Power supply:
Only connect the device to a grounded power supply.
Installation:
Ensure that the device is disconnected from the mains before performing any installation work. Unplug the device or
disconnect the power supply.
Cables:
Only use the cables supplied by Rose Electronics together with the device. Damage resulting from the use of third-
party cables is not covered by warranty. Take care not to create tripping hazards when laying cables.
Location:
Electronic devices should never be placed on the ground between the cables. Never obstruct any vents the device
may have. Take care to ensure adequate ventilation.
WARNING:
To avoid risk of electric shock do not open the device or remove any part of the casing. Please contact our
technical support if the device requires servicing.