Rose Electronics QuadraVista II - Manual (Page 49)

QUADRAVISTA 2 INSTALLATION AND OPERATIONS MANUAL 43
By default, „fit to screen” is disabled to display each source in its native aspect ratio in all display modes (Quad, PiP,
Full) of QuadraVista 2.
PiP mode for wide-screen monitors
If you use a wide-screen monitor (for example with an aspect ratio of 16:10) and the active channel does not have a
wide-screen aspect ratio (e.g. 4:3), PiPs are placed aside the full image of the active channel in the black bar on the
right side. The full image of the active channel is displayed left-aligned on the screen resulting in a black bar on the
right side. Provided appropriate PiP size (20%) is set, PiP images are thus placed entirely outside the full screen
channel. No screen content is overlapped. All content of all sources is visible.