Rose Electronics QuadraVista II - Manual (Page 47)

QUADRAVISTA 2 INSTALLATION AND OPERATIONS MANUAL 41
Go to “Select input signal” and define which video signal (VGA or DVI) is to be displayed. If the setting „DVI/VGA” is
selected, QuadraVista 2 will first check the digital input. If there is no signal at this input, the analog signal input will
be checked.
This function can be used to connect e.g. 8 sources (4x VGA + 4x DVI) via Y-cables to QuadraVista 2.
OSD - Horiz / Vert Position
In case of incorrect horizontal position of a computer screen, use this feature to adjust the computer screen
manually. Use the arrow keys to navigate to the AUTO/MAN field and set MAN for manual. Use the “+” or “-” keys in
the value field to adjust the vertical position between –20 and +20, and the horizontal position between –63 and +63.
OSD - Screen Width (Analog input only)