Sony Ultra Wide Converter For SEL16F28 and SEL20F28 - Manual (Page 100)

6. Menu Display and Settings: Technical Menu 100
Technical >Lens
Sets settings related to lenses.
Item Sub-item setting Description
Zoom Ring
Direction Left(W)/Right(T) / Right(W)/Left(T) Sets the direction of zoom ring operation.
[Note]
Enabled only when using an E-mount lens that
supports zoom ring direction switching.
Shading
Compensation Auto / Off Turns automatic shading compensation
on/off.
Chroma
Aberration
Comp. Auto / Off Turns automatic chromatic aberration
compensation on/off.
Distortion
Comp. Auto / Off Turns automatic distortion compensation
on/off.
[Note]
Distortion compensation is not applied when
Imager Scan Mode is set to S35.
Distance
Display Meter / Feet Sets the display units for lens information
and focus position.
Zoom
Position
Display Focal Length / Number / Bar Sets the display format for the zoom
position.
Technical >Video Light Set
Sets the video light lighting method. Available only when using the HVL-LBPC (option).
Item Sub-item setting Description
Video Light
Set Power Link / Rec Link / Rec Link + Stby Sets the lighting control method for the
video light attached to the multi-
interface shoe.
Power Link:
Turns the video light on/off when the
camcorder is turned on/off.
Rec Link:
Turns the video light on/off when the
camcorder starts/stops recording.
Rec Link + Stby:
Turns the video light on/standby
when the camcorder starts/stops
recording.
Technical >APR
Executes APR.
Item Sub-item setting Description
APR Execute / Cancel Runs APR (Automatic Pixel Restoration)
for image sensor auto adjustment.
Execute: Execute function.
[Note]
Always attach the lens cap before running APR.
Technical >Camera Battery Alarm
Sets battery low-voltage alarm settings.
Item Sub-item setting Description
Low Battery 5% / 10% / 15% / … / 45% / 50% Sets the remaining battery level to
display a battery low-voltage alarm (5%
increments).
Battery
Empty 3% to 7% Sets the remaining battery level to
display a battery empty alarm.
Technical >Camera DC IN Alarm
Sets input voltage alarm settings.
Item Sub-item setting Description
DC Low
Voltage1 16.0V to 19.0V ( 16.5V ) Sets the voltage to display a DC IN low
input voltage alarm.
DC Low
Voltage2 15.5V to 18.5V Sets the voltage to display a DC IN
insufficient input voltage alarm.
Technical >Ext. Unit Battery Alarm
Sets XDCA-FX9 battery settings.
Item Sub-item setting Description
Near End:Info
Battery 5% to 100% Sets the remaining battery level to
display a Info-Lithium battery low-
voltage alarm (5% increments).
End:Info
Battery 0% to 5% Sets the remaining battery level to
display a Info-Lithium battery end alarm
and to stop media access.
Near
End:Sony
Battery 11.5V to 17.0V Sets the remaining battery level to
display a battery low-voltage alarm for a
non Info-Lithium battery.
End:Sony
Battery 11.0V to 14.0V Sets the remaining battery level to
display a battery end alarm for a non
Info-Lithium battery and to stop media
access.