Sony Ultra Wide Converter For SEL16F28 and SEL20F28 - Manual (Page 112)

7. External Device Connection 112
Managing/Editing Clips using a Computer
Connecting using a USB Cable
Using an XQD card reader (option)
Connect an XQD card reader using a USB
cable, and insert a memory card in the slot.
The memory card is recognized as a computer
extension drive. On supported computers, you
can import clips at high speed using the mass
storage mode of the camcorder.
Using mass storage mode
Connect the camcorder using a USB cable, and
insert a memory card in XQD card slot A or B.
The memory card is recognized as a computer
extension drive.
1
Remove the grip remote control from the
camcorder, and connect the USB/multi
connector (page 4) to the computer
using a USB cable.
2
Turn the camcorder POWER switch to the
ON position.
A message appears on the viewfinder
screen asking whether to enable USB
connection.
[Note]
The USB connection confirmation message is not
displayed while another confirmation message or
progress message is displayed, for example, when
formatting or restoring an XQD memory card.
The confirmation message is displayed when the
formatting or restoring execution ends. The USB
confirmation message is also not displayed when
the clip properties screen is displayed. The message
is displayed when processing ends or when you
return to the thumbnail screen.
3
Turn the multi-function dial to select
Execute.
4
On Windows, check that the card is added
as a removable disk in the “My Computer”
window.
On Macintosh, check that a folder called
“NO NAME” or “Untitled” (editable) is
created on the Desktop.
[Notes]
ˎ ˎ Do not perform the following operations if the access
indicator is lit red.
– Turning the power off. Disconnecting the power
cord
– Removing the XQD memory card
– Disconnecting the USB cable
ˎ ˎ Operation is not guaranteed to work on all computers.
Using a Nonlinear Editing System
In a nonlinear editing system, editing software
(option) that supports the formats recorded by
the camcorder is required.
Use dedicated application software to save
the clips you want to edit on the HDD of the
computer beforehand.