Sony Ultra Wide Converter For SEL16F28 and SEL20F28 - Manual (Page 60)

4. Network Functions: Using Web Remote Control 60
Display Password
Shows/hides the password.
When set to Off, the configured password is
not displayed. When entering a password, all
characters are displayed as asterisks.
When set to On, the configured password
is displayed. When entering a password, all
characters are displayed.
Passive Mode
Turn passive mode on/off.
Destination Directory
Enter the directory on the destination server.
[Note]
If characters that are invalid on the destination server
are entered in the destination directory, files will
be transferred to the user’s home directory. Invalid
characters will vary depending on the server.
Using Secure Protocol
Set whether to perform secure FTP uploading.
Setting to ON displays the certificate status.
To import or clear a certificate, tap Select
Function and select a task in the displayed
menu.
ˎ ˎ Load
Load a CA certificate.
* The certificate to be loaded must be in PEM
format, and should be written to the root
directory of the SD card with “certification.pem”
file name.
ˎ ˎ Clear
Clear the CA certificate.
ˎ ˎ None
Do not load or clear a certificate.
[Note]
Set the clock of the camcorder to the correct time before
importing a CA certificate.
Changing registered server settings
Select the server whose settings you want to
change on the Upload Settings screen, then
tap Edit. Change the settings as required on
the displayed screen.
You can also set a server using File Transfer
(page 105) in the Network menu.
Uploading a proxy file automatically
Auto Upload On/Off
When Auto Upload On/Off is set to On and
the camcorder is connected to the Internet,
the camcorder automatically uploads a proxy
file to the transfer destination that is set using
Default Upload Server after recording.
Default Upload Server
Select the default destination file transfer
server.
File transfer management (File Transfer)
You can transfer original files recorded on an
XQD memory card or proxy files recorded on
an SD card, manage file transfer, and configure
the file transfer destination.
Transferring files (Slot A, Slot B, Slot SD/MS)
You can display a list of clips recorded on
media inserted in slot A/slot B or a list of proxy
files recorded on media inserted in the UTILITY
SD/MS card slot.
You can select a displayed file to upload the
file to a server on the Internet.
Uploading a proxy file on an SD card
1
Connect the camcorder and device using
a LAN connection (page 49).
2
Launch a browser on the device and
display the web remote control
(page 58).
3
Display the file list screen to select a file.
Tap
>File Transfer >Slot SD/MS.
A file list screen for the media inserted in
the UTILITY SD/MS card slot appears.
4
Select the file to upload.
Tap the file to select it. To cancel, tap the
file again.
You can double-tap the file to play the file
and check the contents (SD card only).
5
Tap Transfer.
The server that you set using Default
Upload Server in “Registering a
destination server” (page 59) appears.
To change the server, tap the server to
display the server list, then select a server.
Input the name of the directory on the
server in Directory if necessary.
6
Tap Transfer.
The camcorder starts uploading the
selected file.
To cancel uploading, tap Cancel.
Uploading an original file on an XQD memory
card
[Tip]
The cover of the XQD card slot must be closed in order
to view information about the files on the XQD memory
card.
1
Connect the camcorder and device using
a LAN connection (page 49).
2
Launch a browser on the device and
display the web remote control
(page 58).
3
Display the file list screen to select a file.
Tap
>File Transfer >Slot A or Slot B.
A file list screen for the media inserted in
slot A or slot B appears.
Example: Slot A screen
4
Select the file to upload.
Tap the file to select it. To cancel, tap the
file again.
5
Tap Transfer.
The server that you set using Default
Upload Server in “Registering a
destination server” (page 59) appears.
To change the server, tap the server to
display the server list, then select a server.
Input the name of the directory on the
server in Directory if necessary.