Sony Ultra Wide Converter For SEL16F28 and SEL20F28 - Manual (Page 105)

6. Menu Display and Settings: Network Menu 105
Network >Network Client Mode
Sets settings related to network client mode.
Item Sub-item setting Description
NCM
Settings1 Display Name Sets the display name shown in the NCM
Settings menu.
CCM Address Sets the address of the destination CCM
to connect.
Host name or IP address
CCM Port (1 to 65535 ( 8443 )) Sets the port number of the destination
CCM to connect.
User Name Sets the user name for authentication of
the CCM connection.
Password Sets the authentication password of the
CCM connection.
CCM Certificate
Load / Clear / None
Loads a certificate when connecting to
CCM or XDCAM air, and clears settings.
CCM Certificate Status
Loaded / Default
Displays the certificate loading status
when connecting to CCM or XDCAM air.
Camera Control
Enable / Disable
Enables/disables camera control from a
CCM, when a CCM is connected, or from
XDCAM air.
Camera Setting
Always / Onetime / Off
Enables/disables All File operations from
a CCM, when a CCM is connected, or from
XDCAM air.
Always:
Enable All File operations from a CCM
or XDCAM air all the time.
Onetime:
Enable All File operations from a CCM
or XDCAM air one time only.
Off:
Disable All File operations from a
CCM or XDCAM air.
Reset
Execute / Cancel
Resets the settings of NCM Settings to
the defaults.
Execute: Execute function.
NCM
Settings2 Same as NCM Settings1.
NCM
Settings3 Same as NCM Settings1.
Network >Network Client Mode
Sets settings related to network client mode.
Item Sub-item setting Description
Streaming
Quality Normal / High Sets the streaming quality.
[Note]
This setting is also reset when All Reset
>Reset without Network (page 107) in the
Maintenance menu is executed.
Network >File Transfer
Sets settings related to file transfers.
Item Sub-item setting Description
Auto Upload
(Proxy) On / Off Turns proxy file auto transfer on/off.
Default
Upload
Server Selects the upload server for files. The
server selected here becomes the auto
upload destination for proxy files, and
the upload destination for files from the
thumbnail screen.
Displays the display name configured in
Server Settings (NCM) and Server Settings
1 to 3.
Clear
Completed
Jobs Execute / Cancel Clears completed transfer jobs from the
list.
Execute: Execute function.
Clear All Jobs Execute / Cancel Clears all transfer jobs from the list.
Execute: Execute function.
View Job List Displays the transfer job list.
Server
Settings
(NCM) Displays the display name of the NCM
server and the service (CCM).
Display Name Displays the display name of the NCM
server.
Service Displays the service.