Sony Ultra Wide Converter For SEL16F28 and SEL20F28 - Manual (Page 75)

6. Menu Display and Settings: Shooting Menu 75
Shooting >Auto Exposure
Sets automatic exposure adjustment settings.
Item Sub-item setting Description
AGC Limit When ISO/Gain/EI Mode is set to dB:
3dB / 6dB / 9dB / 12dB / 15dB / 18dB
When ISO/Gain/EI >Mode is set to ISO with
dynamic range of 460% and Base
Sensitivity is set to High:
ISO 2000 / ISO 2500 / ISO 3200 /
ISO 4000 / ISO 5000 / ISO 6400 /
ISO 8000 /
ISO 10000 / ISO 12800
When ISO/Gain/EI >Mode is set to ISO with
dynamic range of 460% and Base
Sensitivity is set to Low:
ISO 400 / ISO 500 / ISO 640 /
ISO 800 / ISO 1000 / ISO 1250 /
ISO 1600 /
ISO 2000 / ISO 2500
When ISO/Gain/EI >Mode is set to ISO with
dynamic range of 800% and Base
Sensitivity is set to High:
ISO 3200 / ISO 4000 / ISO 5000 /
ISO 6400 / ISO 8000 / ISO 10000 /
ISO 12800 /
ISO 16000 / ISO 20000
When ISO/Gain/EI >Mode is set to ISO with
dynamic range of 800% and Base
Sensitivity is set to Low:
ISO 640 / ISO 800 / ISO 1000 /
ISO 1250 / ISO 1600 / ISO 2000 /
ISO 2500 /
ISO 3200 / ISO 4000
When ISO/Gain/EI >Mode is set to ISO with
dynamic range of 1300% and Base
Sensitivity is set to High:
ISO 5000 / ISO 6400 / ISO 8000 /
ISO 10000 / ISO 12800 / ISO 16000 /
ISO 20000 /
ISO 25600 / ISO 32000
When ISO/Gain/EI >Mode is set to ISO with
dynamic range of 1300% and Base
Sensitivity is set to Low:
ISO 1000 / ISO 1250 / ISO 1600 /
ISO 2000 / ISO 2500 / ISO 3200 /
ISO 4000 /
ISO 5000 / ISO 6400
Sets the maximum gain of the AGC
function.
AGC Point F2.8 / F4 / F5.6 Sets the F-stop value of the iris where
AGC operation starts when the AGC
function is On.
Shooting >Auto Exposure
Sets automatic exposure adjustment settings.
Item Sub-item setting Description
Auto Shutter On / Off Turns the auto shutter control function
on/off.
A.SHT Limit 1/100 / 1/150 / 1/200 / 1/250 / 1/2000 Sets the fastest shutter speed of the auto
shutter function.
A.SHT Point F5.6 / F8 / F11 / F16 Sets the F-stop value of the iris where
auto shutter operation starts.
Clip High
light On / Off Turns the function that ignores brightest
areas to provide a flatter reaction to high
luminance on/off.
Detect
Window 1 / 2 / 3 / 4 / 5 / 6 / Custom Sets the light metering range for
automatically adjusting the exposure
according to the brightness of the
subject. (Not available when adjusting
exposure manually)
Detect
Window
Indication On / Off Turns the light metering range indication
on/off.
Average Peak
Level Ratio –99 to +99 ( ±0 ) Sets the ratio between the average value
and the peak of the video signal used for
Auto Exposure detection.
Custom
Width 40 to 999 ( 500 ) Sets the width of the light metering
range.
Custom
Height 70 to 999 ( 500 ) Sets the height of the light metering
range.
Custom H
Position –479 to +479 ( ±0 ) Sets the horizontal position of the light
metering range.
Custom V
Position –464 to +464 ( ±0 ) Sets the vertical position of the light
metering range.