Canon DP-V2421 4K Reference Display - Manual (Page 108)

108 OSD Menu
Signal Information
Shows the signal information. When "Select Input Signal" is "Quad Input", information for the entire signal and each
input is displayed. Select a signal with the jog dial according to the guide at top right corner of the menu. When signal
information has been obtained although it is not displayed on the screen, the content of the information is grayed out.
SDI Signal HDMI Signal
Item Display Example Item Display Example
Channel
Input Configuration
Select Input Signal
Image Division
Format
Resolution
Picture Rate, I/P/PsF*
SDI Payload ID
Video Standard
Sampling Structure, Bit Depth
Picture Rate
Scanning Method
Link Number
Colorimetry
Transfer Characteristics
CH1
3G/HD-SDI (3G-A)
Quad Input
Automatic
Automatic
4096x2160
24.00P
89 C3 46 01
3G-SDI
4:4:4:4 GBRA 10-bit
24.00
Progressive/Progressive
(Transport/Picture)
Single/Link_1
UHD
SDR-TV Channel
Input Configuration
Format
Resolution
Picture Rate, I/P/PsF
Pixel Encoding, Color Depth
Matrix
Range
EOTF
Max Luminance (Peak/Avg.)
Display Luminance (Max/Min)
White Point
Primary Color Red
Primary Color Green
Primary Color Blue CH4
HDMI
Automatic
4096x2160
60.00P
4:2:2 YCbCr 10-bit
ITU-R BT.709
Full
SMPTE ST 2084 (PQ)
1000 / 500 cd/m
2
1000 - 0.005 cd/m 2
x=0.313, y=0.329
x=0.640, y=0.330
x=0.300, y=0.600
x=0.150, y=0.060
* When a content is grayed out, an asterisk "*" may be displayed indicating low "Picture Rate" accuracy such as "24.00P *".
System Information
Shows the video display status and network information.
Item Display Example
Display DP-V2420
Serial No. 000000000000
Firmware/License Ver. 1.3
Usage Time* 5 h
IP Address 192.168.0.1
Subnet Mask 255.255.255.0
MAC Address FF:FF:FF:FF:FF:FF
Wi-Fi IP Address 192.168.0.1
Wi-Fi Subnet Mask 255.255.255.0
* The "Usage Time" is not always "0" when you purchase the display due to factory inspection.