Canon DP-V2421 4K Reference Display - Manual (Page 32)

32 Operating the Video Display
Inputting Characters
This section describes how to input the characters.
1. Press the MENU button to open the OSD menu.
2. The character input screen appears automatically when
character input is required.
Move the selection frame to the location to enter characters
using the
jog dial ( ).
3. Select characters using the jog dial ( or rotation).
The following characters can be selected: Press
buttons to display them one by one.
Alphanumeric characters: A to Z, a to z, 0 to 9
Symbols: , . : ; ‘ ` - + / = % & ! ? # _ | $ ^ ~ @ { } [ ] < > ( ) space
Characters that cannot be entered are automatically skipped.
4. Repeat steps 2 and 3 until the desired text has been inputted.
5. Press the jog dial when you are finished.
The selection frame moves to "OK".
6. Check the content and press the jog dial to confirm the settings.
Reference
• When selecting "Cancel" or pressing MENU button before selecting "OK", the settings will be reset and the previous screen
will be displayed.
• To erase characters in the selection frame or reset it, press the RESET button on the video display.