Canon DP-V2421 4K Reference Display - Manual (Page 12)

12 Nomenclature
Nomenclature
■ Front face of the main unit
3
1
2
1
2
4 5 6 7 8 9
A q
1 Front stand There are two mounting positions. 16
2 Rear stand This can be detached. 16
3 Headphone terminal Connection for headphone set. 75
4 USB port Connection for an external sensor for calibration ( 27), USB memory, HUB, color
grading controller (Element-Tk made by Tangent Wave Ltd), or wireless LAN adapter
(Wi-Fi adapter,
36).
–
5 CH1 to 3 buttons Changes channel. 33
6 CDL button Switches between normal and CDL mode. –
7 F1 to F8 buttons Execute the defined function. You can assign different functions on F buttons in the
normal and CDL modes respectively.
33
8 MENU button Opens/closes the OSD menu, or moves up one level in a menu. 22
Jog dial Moves the selection frame within the OSD menu, changes the settings (up/down, left/
right, rotation) and determines (press) the selection.
22
RESET button Resets the items to be adjusted using the slider and entered characters. 22
9 (Power) button Turns power On/Off. 21
A q Power indicator Displays the status of the main unit. The brightness of the power indicator can be set
from "Off" or "1 (dark) to 5 (brightest)" (
103). Even when the power indicator is "Off", it
will flash during firmware update, or when an error is detected.
Off: when power supply is not connected
Green lit: when a power supply is connected and the power of the video display is on
Green flash: during calibration or firmware update
Amber lit: during standby (a power supply is connected and the power of the video
display is off)
Amber flash: when error is detected
–