Canon DP-V2421 4K Reference Display User Manual
Page 14
14
Nomenclature
CAUTION
• When connecting an external sensor for calibration to the USB port, the USB cable length must not exceed 3 m (9.8 ft.).
Otherwise, communication error may occur and correct calibration may not be possible.
• The video display can perform measurement or calibration of the display using the DP-V Color Adjustment software. Refer
to the Canon website for the DP-V Color Adjustment.
•
When the video display performs measurement or calibration of the display using the DP-V Color Adjustment or it
is being used via LAN, "DP-V2420" will be displayed as the display name.
• Do not use the HUB when connecting a wireless LAN adapter (Wi-Fi adapter) to a USB terminal. The video display may not
work.
• For safety, do not connect any connector that may have excessive voltage to the terminal of the video display when
connecting peripheral devices.
• Pass through SD-SDI signals are not output correctly.
Note
• Both FAT16 and FAT32 USB memory devices are supported.
• Proper operation cannot be guaranteed for all USB memories.
• It may take 10 seconds or more for the USB memory to be recognized. If the function to save data on a USB memory is
executed during recognition, the message "Detecting USB memory" is displayed.