Genicom 3600 - Manual (Page 120)

3600 Printer Maintenance Manual
5-34
3. Remove the two screws holding the transformer to the base plate and slide
the transformer toward the front of the printer to free it from the metal tabs,
lifting it away from the printer.
4. Install the replacement transformer and push it toward the back of the
printer securing it under the tabs in the printer main deck plate.
5. Secure the transformer to the printer main deck plate with the two screws
removed in Step 3.
6. Reattach the transformer cables to the main PCB, the AC power receptacle,
and the power switch.
7. Install the electronics cover, the media cover, and the power cord, and
check the printer for proper operation.